How Are Full-Mouth Implants Done?

What Are Full-Mouth Implants and When Do They Come Up?

Full-mouth implants are an approach that rebuilds the place of all or most of the remaining teeth in one jaw with a prosthesis resting on artificial roots placed in the jawbone. Instead of filling only that gap, as in a single missing tooth, the bite balance, bone volume and facial support are assessed as a whole. For this reason, full-mouth implants are not a single procedure but a treatment plan made up of consecutive stages.

This plan usually comes up in the following situations: when no teeth remain in the jaw, when the remaining teeth are severely mobile, when a removable prosthesis does not hold or comes loose while speaking and chewing, or when no sound teeth remain in the back region to carry chewing. The decision about which of the remaining teeth will be kept and which will be extracted is taken after examining the bone support and root health of each individual tooth. Teeth to be preserved and implants can be present in the same jaw; this is called implant-supported tooth treatment. This is also the technical name of what is described in everyday language as “having all teeth as implants”: a superstructure built not on every existing root, but on as many implants as the jawbone can carry.

The main difference between full-mouth implants and a single tooth implant

In a single tooth implant, the impression, planning and superstructure focus on one region. In full-mouth implants, the whole jaw is read as a unit: the front-to-back position of the implants, their angle relative to one another, the distribution of the biting force and lip support are calculated together. That is why both the treatment duration and the number of stages are greater than for a single tooth.

Stage One: Clinical Examination, Planning and Imaging

The most critical stage for the outcome of full-mouth implant treatment is the first examination together with imaging. The task of the dentist at this stage is to answer the question “how many implants, and where” on the basis of bone data. The examination assesses the tissues inside the mouth, the thickness of the gums, the condition of the remaining teeth, the bite relationship and the jaw joint. Imaging follows: it shows the height and width of the bone and the position of the nerve canals and sinus cavities in three dimensions. Without this information, implant placement rests on estimation alone; whereas most unwanted situations such as nerve damage and implant loss arise from an incomplete assessment at the planning stage.

Aesthetic expectations are discussed together with the imaging data: the lip line, the smile line, the visible length of the teeth and the proportions of the face. A digital model is created by means of an intraoral scan or an impression; the surgical and prosthetic stages are planned together on this model. If you would like to read the information in this section together with the notes on the page about the dentist Sertaç Kızılkaya, the clinical approach is described there as well.

Which information goes into the plan

  • Bone height and width, together with the density distribution
  • The position of anatomical structures such as the nerve canal, blood vessels and the sinus cavity
  • How many implants can be placed and which regions require an additional procedure
  • Whether the remaining teeth will be preserved
  • Whether the superstructure will be fixed or removable
  • In how many stages the healing period will be completed

Bone Assessment: What Happens If There Is Not Enough Bone?

The long-term behaviour of an implant depends on the relationship it establishes with the bone surrounding it. If the bone is sufficient, the implant can be placed directly. If bone height or width has decreased, several options are considered: gaining volume with bone particles or a block graft, raising the sinus region in the upper jaw, choosing short implants in the lower jaw because of the proximity of the nerve, or placing the implants at an angle. Some of these procedures are carried out in the same session as the implant, while others are done first and require a separate waiting period for the bone to mature.

The most common cause of reduced bone volume is that a long time has passed since the extraction and that the prosthesis does not provide sufficient stimulus to the bone. For this reason, if a full-mouth implant plan is considered together with the extraction decision, the need for additional procedures may decrease. If a separate procedure such as the extraction of wisdom teeth is required, its sequencing is included in the plan as well; this subject is discussed in detail on the wisdom tooth extraction page. For situations that require a region of their own, the front tooth implant treatment page can also give an idea.

Surgical Stage: How Are the Implants Placed in the Jawbone?

The surgical stage is usually carried out under local anaesthesia; the duration of the procedure varies according to the number of implants and the condition of the bone. After the gum is opened, a bed of implant diameter is prepared in the bone and the implant is placed in that bed. During placement, the rotational resistance of the implant inside the bone is measured; this value is one of the criteria that determine when the superstructure can be made. If sufficient resistance is obtained, a temporary superstructure can be applied in the same session; if the bone is weaker, the implant is left to heal.

The experience in the period after the procedure is similar to that of a single tooth implant: in the first days there is swelling, sensitivity and a need to avoid chewing. The stages of the surgical procedure, the function of the sutures and what is paid attention to during healing are described in detail on the implant surgery process and sutured implant treatment pages; in full-mouth implants the difference is that more than one implant is present in the same jaw and that the procedure is completed within the planned time.

How many implants are needed, and what does each solution name describe?

In the dental literature, expressions such as “all on four implants” or “all on six implants” describe approaches defined by the number of implants and the placement angle. The aim is to place the posterior implants tilted forward in order to reduce the need for bone augmentation in the back region, and to meet the biting force in a balanced way in the front region. The six-implant approach allows the prosthesis to be spread over a longer body and the force to be distributed over a wider area. Which approach is suitable varies according to the bone volume, the proximity of the sinus and the nerve, the biting force and the design of the superstructure. This is not a matter of superiority but a matter of suitability for the patient’s anatomy.

The Healing Period: While the Bone Integrates with the Implant

The fixation of the implant by establishing direct contact with the bone is called bone healing, and this process is completed over weeks to months. The length of the period depends on the density of the bone, the initial resistance of the implants, oral hygiene, smoking and general health. A temporary prosthesis is used during this period; its purpose is to meet the patient’s aesthetic and chewing needs while preventing an excessive load from being placed on the implants.

The healing period is the quiet but decisive part of the treatment. Keeping the area around the gums clean during this process, attending the scheduled review appointments and observing the chewing limits recommended by the dentist ensure an uneventful transition to the permanent superstructure. The rate of healing is not the same for every individual; therefore, instead of giving a “definite calendar”, progress is made according to the data measured at the review examinations.

Superstructure: Fixed Prosthesis or Removable Prosthesis?

Once the implants have integrated with the bone, the superstructure comes next. At this stage there are two main options: a fixed prosthesis secured to the implants by screwing or cementing, which the patient cannot remove; or a prosthesis retained on the implants with special attachment parts, which the patient can remove for cleaning. The choice is made according to the volume of the remaining bone, the number of implants, the patient’s manual dexterity, their cleaning habits and their expectations.

The production of the superstructure is usually multi-staged: impression, try-in, control of the relationship with the gums and final placement. The bite relationship is adjusted carefully during the try-in, because a contact point that remains high can, over time, damage the bone around the implant. Review appointments and regular oral care after delivery directly affect the service life of the superstructure. A specific number of years cannot be guaranteed; durability varies according to care, biting habits and the individual.

CriterionFixed superstructureRemovable superstructure
Chewing sensationCloser to natural teethLower, but a clear improvement compared with a mobile prosthesis
Daily careToothbrush, interdental brush, water flosserRemoving the prosthesis and brushing around the implants
Dentist supportTechnically more extensive repairCan be maintained by renewing the attachment parts
Bone requirementUsually more implants and more bone volumeCan be carried out with fewer implants
Speech and aestheticsNo coverage of the palate, more predictableCoverage of the palate may be needed in the upper jaw

Factors That Determine Treatment Duration and Fee

In full-mouth implant treatment, duration and fee are not tied to a single item; both are the result of the same plan. What determines them is the following: the number of implants to be placed, whether an additional bone procedure or a sinus lift is required, whether the superstructure will be fixed or removable, the material options to be used, in how many stages the healing will be completed, and the procedures to be carried out on the remaining teeth.

For this reason, the fee is not a number that can be stated before the examination and the imaging assessment have been completed. The correct order is this: examination, imaging, the treatment plan shared in writing, and the fee explained over the items of that plan. When the plan is in writing, it also becomes clear which procedure will be carried out at which stage. Details about process management and interim reviews are given on the full-mouth implant treatment process page; how cost items should be read is described on the factors affecting dental implant fees page. While weighing up the decision to have all teeth replaced with implants, you can also look at the renewing all teeth with implants page.

Which Questions Should You Ask Before Treatment?

Deciding on full-mouth implants means entering into a long-term plan. For this reason, the consultation should cover not only “how much will it cost” but also how the process will work. The headings below are the questions that are most useful when making the decision: how many implants are planned and where; is an additional bone procedure required; at which stage will I use a temporary prosthesis; how long will the healing period last; will the superstructure be fixed or removable; how often will review appointments be held; in which situations should I get in touch immediately.

Because the answers to these questions are specific to the patient, they cannot be copied from a general text. A similar approach applies to implant selection: rather than which system will be used, what matters is how often the dentist uses that system, how the prosthetic substructure is built and how the follow-up routine works. These assessment criteria are discussed on the what is considered when choosing an implant page and, more generally, on the dental implant treatment page.

Frequently Asked Questions

Is full-mouth implant treatment completed in a single session?

The whole process does not finish in a single session. The placement of the implants is carried out in a single session in most cases; however, the completion of bone healing is awaited for the permanent superstructure. This waiting period ranges from weeks to months and is determined by the person’s bone structure, hygiene and general health.

If I do not have enough bone for full-mouth implants, can the treatment not be carried out?

Insufficient bone is not the only obstacle to treatment. Options such as gaining volume with bone particles or a block, raising the sinus region, angled placement or the choice of short implants are considered. Which one is suitable is determined after imaging and by means of three-dimensional measurements of the bone.

On what basis is the choice between a fixed and a removable superstructure made?

Bone volume, the number of implants that can be placed, the patient’s cleaning habits, manual dexterity and aesthetic expectations are decisive. A fixed superstructure is closer to natural teeth in terms of chewing sensation, while a removable prosthesis can be carried out with fewer implants and can be cleaned by the patient. Both are planned options; neither has an overall superiority over the other.

What is the service life of implants?

A specific number of years cannot be guaranteed. The lifespan depends on the regularity of oral care, adherence to review appointments, smoking, biting habits and general health. Keeping the tissues around the implants healthy through regular care and reviews is the most important factor affecting long-term success.

How are chewing and speech affected during the treatment?

In the first days after surgery there is swelling, sensitivity and a need to avoid certain foods. Because a temporary prosthesis is used during the healing period, chewing and speech largely continue; however, a temporary adaptation period may be experienced with hard foods and with certain sounds. This usually recedes after the permanent superstructure has been placed.

Related Content

Last updated: October 2026 · This content is for information purposes; consult your dentist for diagnosis and a treatment plan.