How Are Front Tooth Implants Placed?

Short answer: A front tooth implant is a multi-step treatment: it begins with an examination and an X-ray assessment, the bone volume is measured and graft material is applied where needed, the implant is placed and the gum contour is shaped, and in the final stage an impression and shade selection lead to the permanent crown.

The front incisors are the most visible part of the face. When a missing tooth in this region is replaced with an implant, the aim is not only to fill the gap; a gum contour that harmonises with the neighbouring teeth, a natural interdental papilla and an appearance that is balanced in terms of colour all have to be established. Planning in the front region therefore involves more detailed preparation and a longer assessment process than in the posterior region. Below we explain which steps the front tooth implant process involves, in which situations additional procedures may be required, and how appearance is managed during the healing period. The information given here is for general information purposes; a plan specific to the individual can only be determined after an intraoral examination and an X-ray.

Why is a front tooth implant planned differently from a posterior implant?

In the posterior region the main axis of implant planning is chewing function: the bone is often more voluminous, the gum margin is not very visible, and the person’s priority is comfort while biting. In the front region the picture changes. In the upper jaw the bone in the front region is thin and slopes outwards in most people. The gum margin lies within the smile line and even millimetric differences attract attention.

For this reason the angle and depth of the implant in the front region, together with the soft tissue support around it, are planned separately. The position of the neighbouring teeth, the length of the teeth in the opposing jaw and lip movement are also included in the assessment. Because bone and gum loss after extraction becomes noticeable faster in this region, starting treatment early where possible makes planning easier. If a wide gap rather than a single tooth is involved, the assessment becomes more comprehensive; in such cases full mouth implant treatment and having all teeth replaced with implants may come into question. To become familiar with the general process, the article on how dental implants are placed is a good starting point.

Aesthetic expectations in the front region: pink aesthetics and the gum contour

The term pink aesthetics describes a holistic harmony that covers the colour, thickness and shape of the gum alongside the appearance of the white teeth. In the front region, what determines the result is often not the crown itself but the gum framework in which the crown sits. However well the white tissue is prepared, if the gum contour that carries it is not harmonious, the appearance will not reach the level aimed for.

Why is the gum contour so decisive?

When the upper edge of the gum is not level with the neighbouring teeth, or when the triangle between the teeth is not filled in a natural way, the resulting appearance is immediately noticeable. Because the gum around an implant does not attach to the tooth with fibres as it does in a natural tooth, it needs more delicate tissue support. That is why the position of the implant and the surrounding soft tissue are shaped not only during the surgical stage but also during the temporary prosthesis stage.

The gum triangle and the possibility of recession

The fullness of the gum triangle between two teeth depends on the distance between the neighbouring teeth and the height of the bone crest. When the distance is wide, filling this triangle completely may not always be possible. Similarly, recession may be seen over time in people with a thin gum biotype. Gum thickness is therefore assessed separately during the examination and, where necessary, additional procedures aimed at increasing tissue support are planned. These assessments vary from person to person; the same result is not expected in every case.

Bone and graft needs in front tooth implants

For the implant to sit in a healthy way, sufficient bone volume must be present around it. After a tooth is extracted, bone resorption begins in the region; in gaps that have been left untreated for a long time, the loss of volume is more pronounced. Because bone in the front region is generally thinner, this loss affects the aesthetic result directly.

What options are there if the bone is insufficient?

When bone volume is insufficient, grafting comes into question. The type of material used and the method are chosen according to the needs of the case; in some situations it is carried out in the same session as implant placement, in others beforehand. If the bone is not sufficient, different size and position options for the implant can also be considered. These decisions are taken by measuring bone thickness and height. The presence of another gap or of an impacted tooth in the same jaw affects planning; for example, changes occurring after wisdom tooth extraction are also included in the assessment.

How are front tooth implants placed? The process step by step

Examination, X-ray and digital planning

The first step is the clinical examination. The intraoral examination, gum measurements and X-ray images are assessed together. Where considered necessary, bone thickness and neighbouring anatomical structures are examined with cross-sectional imaging. Thanks to digital planning, the angle and depth at which the implant will be placed are determined in advance. At this stage the steps of the treatment, possible additional procedures and a time estimate are shared as a written plan.

Placement of the implant

The procedure is carried out under local anaesthesia. The implant is placed in the prepared site in the planned position and the surrounding tissue is closed. In some cases a healing abutment is placed on the implant during the healing period. The details of cases in which sutures are used are discussed in the article on sutured implants. You can find the details of preparation before the procedure and of the process afterwards under how implant surgery proceeds.

Temporary prosthesis plan

Whether a temporary solution will be applied in the session in which the implant is placed is decided according to the initial stability of the implant and the health of the surrounding tissue. In some cases a temporary tooth is prepared on the same day, while in others a short waiting period is preferred. This choice is a matter of balance specific to the individual; the aim is both to preserve aesthetic comfort and not to harm the healing tissue.

In the front region the temporary prosthesis is an inseparable part of the treatment. Its purpose is twofold: to preserve the person’s comfort in speaking and in appearance, and to guide the gum towards the desired contour. Depending on the situation of the gap, the temporary prosthesis can be planned as a removable solution or as a fixed solution supported by the implant. The final shape of the gum is largely determined at this stage; the design of the temporary prosthesis therefore directly affects the appearance of the permanent crown. You can read in comparative form which stages the treatment as a whole passes through in the article on the full mouth implant treatment process.

Impression and shade selection

Once the tissue around the implant has healed and the gum contour has settled, an impression is taken for the permanent crown. In the front region the impression must be taken in a way that transfers the shape not only of the tooth but also of the gum; otherwise the crown sits in a way that does not match the gum, and this mismatch is immediately visible in the smile line. Shade selection is carried out in daylight, by comparison with the neighbouring and opposing teeth. The light-transmitting property and the surface texture of the tooth colour are decisive for naturalness in the front region. For details on how shades are chosen you can look at the page on tooth colour. When the desired harmony cannot be achieved with a single impression, a trial fitting is usual.

What does the appearance look like during healing?

The time taken for the implant to integrate with the surrounding bone varies from person to person and generally lasts a few months. Because the temporary prosthesis is in place during this period, the person is not left without a tooth in daily life. In the first days, swelling, sensitivity and slight bleeding may be seen in the region; these are ordinary parts of the healing process and generally subside within a short time. The recommended care, cleaning of the region and following the instructions given make the process easier.

As healing progresses the gum contour settles a little further and the shape of the temporary prosthesis can be adjusted accordingly. If gum recession or an unwanted tissue change is noticed during this period, intervention is planned before the permanent crown is made. Knowing from the outset that the appearance may change temporarily helps expectations to remain realistic. The result is not the same in every person; bone structure, gum biotype and care habits affect the result.

Regular follow-up appointments are planned during the healing period. At these appointments gum measurements are repeated, the cleanliness of the region is assessed and the effect of the temporary prosthesis on the tissue is monitored. If considered necessary, small adjustments are made to the temporary prosthesis. This follow-up allows problems to be noticed early before moving on to the permanent crown stage.

Factors that determine the fee in front tooth implants

Several variables determine the fee in front region implant treatment: how many teeth are missing, bone volume and graft needs, the type of temporary prosthesis, the material of the permanent crown and whether additional procedures are required. For this reason two different people may end up with different plans even for the same region. Fee information is shared as a written plan after the examination and X-ray assessment. For a detailed account of the factors that affect price you can look at the article on dental implant costs. Knowing which criteria are discussed in implant selection before treatment begins also makes decision-making easier; the article on choosing a dental implant is a guide on this subject.

Main differences between front and posterior planning

The table below compares the planning priorities of the two regions in general terms. In every case these differences do not carry the same weight.

Planning headingFront (incisor) regionPosterior region
PriorityAesthetic harmony and gum contourChewing function and distribution of force
Bone structureThinner and more delicate in most peopleGenerally more voluminous
Surrounding tissueGum margin and triangle visibleGum margin mostly not visible
Temporary prosthesisPlanned early for speech and appearanceMostly not required
Shade harmonyCompared with the neighbouring and opposing teethLess decisive

Frequently Asked Questions

How long does a front tooth implant take to complete?

The duration varies from person to person; bone healing, whether a graft is required and how quickly the gum contour settles are decisive. In general, integration of the implant with the surrounding bone takes a few months, after which the impression and permanent crown stage begins. The exact schedule is stated in the written plan after the examination.

Will I be left without a tooth while a front tooth implant is done?

Because a temporary prosthesis is planned as part of the treatment in the front region, the gap is usually closed during the healing period. Whether the temporary solution will be removable or a fixed prosthesis supported by the implant is determined according to the situation of the case.

Can gum recession occur in the front region?

In people with a thin gum biotype and in situations where bone support is limited, recession may be seen over time. This possibility is assessed during the examination and, if necessary, procedures aimed at increasing tissue support are planned. The same result is not expected in every case.

Does a front tooth implant damage the neighbouring teeth?

Implant treatment is a solution that is independent of the neighbouring teeth; it does not require the neighbouring teeth to be trimmed. During the planning stage the root position and gum level of the neighbouring teeth are measured so that the implant can be placed in harmony with them.

Is there an age limit for an implant in the front region?

What is decisive is not calendar age but whether growth of the jaw bone has been completed. In young people, implant planning is generally postponed while growth continues. Suitability is assessed by examination and imaging.

Related content

When front region implant treatment is planned, how the case is approached and the experience behind it are among the factors that affect the result; you can find information on this subject on the about page.

Last updated: October 2026 · This content is for information purposes; consult your dentist for diagnosis and a treatment plan.